IMIS

Publicaties | Instituten | Personen | Datasets | Projecten | Kaarten
[ meld een fout in dit record ]mandje (0): toevoegen | toon Print deze pagina

Field measurements to investigate submerged slope failures
van Duinen, A.; Bezuijen, A.; van den Ham, G.; Hopman, V. (2014). Field measurements to investigate submerged slope failures, in: Krastel, S. et al. Submarine Mass Movements and Their Consequences: 6th International Symposium. Advances in Natural and Technological Hazards Research, 37: pp. 13-21. https://dx.doi.org/10.1007/978-3-319-00972-8_2
In: Krastel, S. et al. (2014). Submarine Mass Movements and Their Consequences: 6th International Symposium. Advances in Natural and Technological Hazards Research, 37. Springer International Publishing: Switzerland. ISBN 978-3-319-00971-1; e-ISBN 978-3-319-00972-8. XVI, 683 pp. https://dx.doi.org/10.1007/978-3-319-00972-8, meer
In: El-Sabh, M.I. (Ed.) Advances in Natural and Technological Hazards Research. Springer: Dordrecht. ISSN 1878-9897; e-ISSN 2213-6959, meer
Peer reviewed article  

Beschikbaar in  Auteurs 
Documenttype: Congresbijdrage

Trefwoord
    Marien/Kust
Author keywords
    Sand; Static liquefaction; Breach flow; Relative density; Stateparameter; Cone penetration test

Auteurs  Top 
  • van Duinen, A.
  • Bezuijen, A., meer
  • van den Ham, G., meer
  • Hopman, V.

Abstract
    Many flood defences in The Netherlands have been disapproved for flow slides of the Holocene subsoil. Traditionally these flow slides are assumed to be induced by static liquefaction. Only in recent times it has been recognized that flow slides may also concern breach flows, which do not necessarily require loosely packed sand. For both static liquefaction and breach flow the inaccuracy of the currently applied methods to determine in situ density lead to high computed probabilities of failure, which is one of the main problems in the safety assessment of flow slides. In order to reduce this uncertainty, based on a literature study a number of methods were selected and applied on four test locations: two sites where flow slides occurred and two sites where no flow slides occurred, but for which high probabilities on flow slides were calculated based on current Dutch assessment rules for liquefaction and breach flow. For these sites CPT's and electrical resistivity cone tests available from earlier investigations, were extended with seismic CPT's and interpreted for relative density and state parameter. The results of this study lead to the conclusion that some of the historical flow slides in The Netherlands may have been the result of static liquefaction in loosely packed sand. For many other slopes, however, it is more reasonable to assume that the failures must have been breach flows in medium or densely packed layers.

Alle informatie in het Integrated Marine Information System (IMIS) valt onder het VLIZ Privacy beleid Top | Auteurs