IMIS

Publicaties | Instituten | Personen | Datasets | Projecten | Kaarten
[ meld een fout in dit record ]mandje (0): toevoegen | toon Print deze pagina

Chloride penetration in cracked mortar and the influence of autogenous crack healing
Maes, M.; Snoeck, D.; De Belie, N. (2016). Chloride penetration in cracked mortar and the influence of autogenous crack healing. Constr. Build. Mater. 115: 114-124. https://dx.doi.org/10.1016/j.conbuildmat.2016.03.180
In: Construction and Building Materials. Elsevier: Oxford. ISSN 0950-0618; e-ISSN 1879-0526, meer
Peer reviewed article  

Beschikbaar in  Auteurs 

Trefwoord
    Marien/Kust
Author keywords
    Autogenous healing; Marine environment; Sulphate; Ongoing hydration;Calcium carbonate precipitation

Auteurs  Top 

Abstract
    Cracks in cementitious materials have a negative influence on the durability in aggressive environments, especially in marine environments since chlorides and sulphates are able to penetrate faster. Since constructions in marine environments mostly have an important social function with a high economic impact, repair of the cracks is of utmost importance. In this paper, the ability of the material to heal 100 mu m and 300 mu m cracks autogenously in marine environments is investigated. To do so, some Ordinary Portland Cement mortar samples and Blast-furnace Slag blended mortar samples were permanently immersed in chloride solutions as well as in combined chloride and sulphate solutions. Another part of the samples were exposed to wet-dry cycles in water and in chloride solutions. Autogenous crack healing was evaluated by means of microscopic measurements. The resistance against chloride penetration was measured by means of colorimetric measurements and chloride profiles. It was shown that cementitious materials, exposed to a simulated marine environment, are able to heal or seal crack widths up to 100 mu m. Autogenous healing is obtained by ongoing hydration, calcium carbonate precipitation as well as by formation of a layer of magnesium and sulphate reaction products (brucite) at the surface. Furthermore, the resistance against chloride penetration improves due to the healing process. However, the efficiency depends on the initial crack width.

Alle informatie in het Integrated Marine Information System (IMIS) valt onder het VLIZ Privacy beleid Top | Auteurs