* Sea-Bird SBE 19plus Data File:
* FileName = C:\Sea-Bird\Casts\061005_ZL2a.hex
* Software Version Seasave Win32 V 5.31a
* Temperature SN = 4126
* Conductivity SN = 4126
* System UpLoad Time = Oct 06 2005 12:31:36
** Ship:
** Cruise:
** Station:
** Latitude:
** Longitude:
# nquan = 11
# nvalues = 39
# units = specified
# name 0 = c0mS/cm: Conductivity [mS/cm]
# name 1 = obs: OBS, Backscatterance (D & A) [NTU]
# name 2 = prdM: Pressure, Strain Gauge [db]
# name 3 = tv290C: Temperature [ITS-90, deg C]
# name 4 = par: PAR/Irradiance, Biospherical/Licor
# name 5 = depSM: Depth [salt water, m]
# name 6 = spar: SPAR/Surface Irradiance
# name 7 = nbin: number of scans per bin
# name 8 = sal00: Salinity [PSU]
# name 9 = density00: Density [density, Kg/m^3]
# name 10 = flag: flag
# span 0 =  36.334909,  44.044893
# span 1 =     5.1823,    19.1264
# span 2 =      1.008,     20.176
# span 3 =    15.9003,    16.2610
# span 4 = 9.3561e-01, 9.7712e-01
# span 5 =      1.000,     20.000
# span 6 = 4.8188e+00, 1.0055e+01
# span 7 =          2,          6
# span 8 =    28.1596,    34.9454
# span 9 =  1020.4412,  1025.6679
# span 10 = 0.0000e+00, 0.0000e+00
# interval = meters: 1
# start_time = Oct 06 2005 12:31:36
# bad_flag = -9.990e-29
# sensor 0 = Frequency 0  temperature, 4126, 12-May-04
# sensor 1 = Frequency 1  conductivity, 4126, 12-May-04, cpcor = -9.5700e-08
# sensor 2 = Pressure Number
# sensor 3 = Extrnl Volt  0  backscatterance, 1814, 07-May-04
# sensor 4 = Extrnl Volt  1  irradiance (PAR), primary, 20141, 04/10/2005
# sensor 5 = Extrnl Volt  3  surface irradiance (SPAR), degrees = 0.0
# datcnv_date = Jul 05 2006 10:10:02, 5.37d
# datcnv_in = S:\ctdcasts\ctd casts van pen\4126_051006_ZL2a.hex S:\ctdcasts\ctd casts van pen\4126_0410.con
# datcnv_skipover = 0
# filter_date = Jul 05 2006 10:14:07, 5.37d
# filter_in = S:\ctdcasts\ctd casts van pen\cnv\4126_051006_ZL2a_C.cnv
# filter_low_pass_tc_A = 0.500
# filter_low_pass_tc_B = 1.000
# filter_low_pass_A_vars = c0mS/cm
# filter_low_pass_B_vars = prdM depSM
# alignctd_date = Jul 05 2006 10:16:08, 5.37d
# alignctd_in = S:\ctdcasts\ctd casts van pen\cnv\filter\4126_051006_ZL2a_CF.cnv
# alignctd_adv = tv290C 0.500
# loopedit_date = Jul 05 2006 10:17:38, 5.37d
# loopedit_in = S:\ctdcasts\ctd casts van pen\cnv\filter\align\4126_051006_ZL2a_CFA.cnv
# loopedit_minVelocity = 0.250
# loopedit_surfaceSoak: do not remove
# loopedit_excl_bad_scans = yes
# binavg_date = Jul 05 2006 10:19:20, 5.37d
# binavg_in = S:\ctdcasts\ctd casts van pen\cnv\filter\align\loop\4126_051006_ZL2a_CFAL.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 0.000, max = 0.000, value = 0.000
# Derive_date = Jul 05 2006 10:21:26, 5.37d
# Derive_in = S:\ctdcasts\ctd casts van pen\cnv\filter\align\loop\bin\4126_051006_ZL2a_CFALB.cnv S:\ctdcasts\ctd casts van pen\4126_0410.con
# file_type = ascii