IMIS

Publicaties | Instituten | Personen | Datasets | Projecten | Kaarten
[ meld een fout in dit record ]mandje (0): toevoegen | toon Print deze pagina

Wave run-up and overtopping: prototype versus scale models
De Rouck, J.; Verdonck, R.; Troch, P.; Van Damme, L.; Schlütter, F.; De Ronde, J. (1998). Wave run-up and overtopping: prototype versus scale models, in: Edge, B.L. (1999). Coastal Engineering 1998 conference proceedings June 22-26 1998 Copenhagen, Denmark. pp. 1039-1052
In: Edge, B.L. (1999). Coastal Engineering 1998 conference proceedings June 22-26 1998 Copenhagen, Denmark. Coastal Engineering Research Council of the American Society of Civil Engineers: USA. ISBN 0-784-0411-9. 3699 pp., meer

Beschikbaar in  Auteurs 
Documenttype: Congresbijdrage

Trefwoord
    Marien/Kust

Auteurs  Top 
  • De Rouck, J., meer
  • Verdonck, R.
  • Troch, P., meer
  • Van Damme, L., meer
  • Schlütter, F., redacteur
  • De Ronde, J., meer

Abstract
    The determination of the crest level is one of the most important points in the design of sloping coastal structures. The crest level of sloping coastal structures is governed by wave run-up and overtopping. Recent measurement results of run-up on prototype have indicated that wave run-up may be underpredicted by scale model tests. So full scale measurements of wave run-up is necessary. At the same time the overtopping discharge on a prototype breakwater will be measured. Within the MAST III - OPTICREST project, these measurements will be carried out at coastal structures at two locations: Zeebrugge (Belgium) and Petten (The Netherlands). The results obtained from these prototype measurements will be compared with those from scale model tests and will be used to calibrate numerical models. This paper also presents the contents of the OPTICREST project.

Alle informatie in het Integrated Marine Information System (IMIS) valt onder het VLIZ Privacy beleid Top | Auteurs